RiteTilt – Automatic Tilt Controller

 Keeps equipment level to improve capacity and precision.

Automatic Tilt Controller
RiteTilt
Pile driver with boxes
RiteTilt
Controller
RiteHeight

  • Semiconductor tilt sensor has no moving parts and provides long-term reliability.
  • Easily accessible potentiometer to adjust and set level position.
  • Auto-resetting circuit breaker protects against short circuits and automatically restores normal operation when the fault is corrected.
  • Protected against reverse polarity and common power transients.
  • Protection circuits on output relay contacts absorb inductive energy from solenoids to ensure long relay life.
  • Sealed case with venting to protect electronics from dirt and moisture.

Controller circuits are enclosed in a sturdy case with a removable cover. 

 

No interface box needed for this product. 

Sensitivity:  +/- 0.5 degrees (typical – can be adjusted for desired response

Response Time: Select 1 second or 2 seconds for optimal performance

Activation Time-out: 25 seconds, with 7-second retry each 30 seconds. For single acting cylinders, Lower output time-out can be disabled

Supply Voltage:  +12VDC (+24VDC available)

Outputs: Lower (retract cylinder)  Raise (extend cylinder)

Output Signals: Normally open, 12VDC when activated

Max. Output current: 4.0A

Connection:  2.4m (8ft) cable connects to controller with weather proof connector

Case: Impact resistant and flame retardant ABS

LxHxD: 120x65x60mm (4.75×2.56×2.36 inches)

Gasketed to seal out moisture and dirt

Integral mounting holes

NOTE: Many of these specifications can easily be customized for any given application. Please call to discuss your requirements.


The RiteTilt controller is designed for use on a wide variety of equipment that must be maintained in a level position (zero tilt angle) in order to perform well. Typical applications include root crop and vegetable harvesters, and trenching equipment. Without automatic tilt control, the operator must visually check a gauge or indicator and maintain the correct angle on-the-go. The RiteTilt controller attached to the machine continuously measures tilt and activates electrical output signals when the tilt angle requires adjustment. The electrical signals control solenoid valves and cylinders or electric actuators to automatically keep the machine level.

Steep Hills:

When equipment operates on steep hills, sometimes the leveling cylinders reach their limit. In such instances, the RiteTilt will time out and release the solenoid valve to avoid unnecessarily burdening the hydraulic system. While the machine remains on the severe incline, the RiteTilt will periodically briefly activate the hydraulics to counter any “sagging” due to leaky valves or seals. As soon as the machine moves off the steep hill, the RiteTilt resumes normal operation to maintain a level position.

Accuracy and Stable Operation:

How quickly the machine tilts when the hydraulics are activated depends on many factors, resulting in a wide range of speeds. On a machine with fast response, it can be difficult to maintain an accurate level position because the machine keeps moving right past the level position after the hydraulics are turned off.  This can result in a situation where the machine constantly rocks back and forth.  The Greentronics RiteTilt deals with this problem using a special “anticipation” algorithm that stops the hydraulics before the machine reaches the level position.  This algorithm enables the Tilt Controller to maintain a very accurate level position without the danger of generating continuous rocking.

Ordering Information

Part #: TC100-2
Price: Contact your nearest dealer for further details and pricing.

System includes the RiteTilt controller with 8ft detachable cable. Installation not included and to be arranged by purchaser. One year limited warranty, with free technical support via telephone, fax, or email.